Tag Archives: RAM

Argh HTPC

Atomic MPC has been suggesting for a while that the best heatsink/fan for a HTPC build was the Scythe Big Shuriken. I’d seen one in April back in Osaka, but was not quite in the right brainspace to purchase it. So, I placed an order with PCCasegear http://pccasegear.com/ (whose excellent next day delivery to rural Vic arrived promptly at our PO box) as the smaller profile should fit.

Yes, it should.

Sadly, it doesn’t and the final configuration doesn’t allow for my 12GB of RAM. All the mucking around also meant that I had to clean off the thermal goop from the CPU.

Defeated, I’ve installed the stock Intel heatsink/fan.

even more HTPC

What’s a HTPC build without a hurdle or twenty? One of my concerns with a HTPC is reducing the heat as much as possibly whilst maintaining a low noise level. For the CPU, this means a whopping big heat-pipe finned heat-sink arrangement with PWM (or resistor throttled) fan.

Having done the research, I decided on the Noctua NH-C14. Large fins, low profile, throttled fans & 2 at low speed for extra heat removal. It also fitted in the dimensions read off the specs. The Level 10 as part of its beautiful design allows easy access to the back of the motherboard for mucking around such as this.

Unfortunately, even though the fan fitted, it caused 2 issues: firstly the size of the 12cm heatsink made contact with the RAM heatsinks (I had decided to go for 12GB of RAM in 3x 2x 2GB). Ok, simply workaround: live with 8GB for now and contemplate later. Second issue was that the case lid for the motherboard section was hinged and therefore did not close for the size of the heatsink/fan.

ARGH! Even though I’d like to finish the project, as the sun has now set I’ll put this in the further contemplation required basket.